HP Surestore 64 Director Switch - Manual (Page 196)

180 Appendix
This appendix lists and explains messages that may display in message boxes as you use
the Product Manager. Solutions to problems implied by each message are included when
applicable.
A
Message Cause/Solution
Activating this configuration will
overwrite the current
configuration Confirmation to activate a new address configuration. Click Yes
to confirm activating the new address configuration or click No to
end the operation.
All configuration names must
be unique. All address configurations must be save with unique names.
Save the configuration with a different name that is unique to all
saved configurations.
All port names must be unique. A duplicate port name was entered. Every configured port name
must be unique. Reconfigure the port with a unique name.
Another Product Manager is
currently performing a firmware
install. Only one firmware install to a specific director can take place at a
time. Wait for the current firmware install to complete and try
again.
A Product Manager instance is
open. Only one specific Product Manager instance can be open for a
product at any one time. Use the current open Product Manager
instance.
Are you sure you want to
delete firmware version? Requesting confirmation to delete the firmware version.
Firmware library can hold only eight firmware versions. Click
Yes
to confirm the firmware deletion or click No to end the operation.
Are you sure you want to
delete this address
configuration? Confirmation to delete the selected address configuration. Click
Yes to confirm the deletion of the address configuration or click
No to end the operation.
Are you sure you want to send
firmware version? Confirmation to add a firmware version to the firmware library.
The firmware library can hold eight firmware versions. Click
Yes
to confirm adding the firmware version to the firmware library, or
click
No to end the operation.