HP Surestore 64 Director Switch - Manual (Page 189)

Backup and Restore Configuration 173
Us
ing M
a
in
tena
nce
Fe
ature
s
Backup and Restore Configuration
Select this option to save the product configuration stored on the director to the HP EFC
server hard disk, or to restore the product configuration from the HP EFC server. Only a
single copy of the configuration is kept on the server.
The QuikSync application and a Zip drive may not be available if you are using a customer-
supplied server platform for the HP EFC management applications.
The purpose of the backup is primarily for single-CTP systems, such as the HP Surestore
Director FC-64, where a backup is needed in order to restore a replacement CTP card. You
can also use this feature for a special purpose configuration or for temporary testing of a
configuration. You cannot modify the location and file name of the saved configuration.
You can only restore the configuration to a director with the same IP address.
1. Select Backup and Restore from the Maintenance menu to display the Backup and
Restore Configuration dialog box.
Figure 66 Backup and Restore Configuration Dialog Box
The Backup and Restore dialog box consists of a short description of the features
performed when you select Backup or Restore.