HP Surestore 64 Director Switch - Manual (Page 151)

Configure Threshold Alerts 135
Config
uring the
Di
re
ctor
Figure 51 New Threshold Alerts Dialog Box - First Screen
3. Enter a name from one to 64 characters in length. All characters in the ISO Latin-1
character set, excluding control characters, are allowed.
4. Select one of the following from the drop-down list under the Name field:
– Rx Throughput. An alert will occur if the threshold set for receive throughput is
reached
– Tx Throughput. An alert will occur if the threshold set for transmit throughput is
reached.
– Rx or Tx Throughput. An alert will occur if the threshold set for either receive or
transmit throughput is reached.
5. Click Next.
A new screen appears with additional parameters. The name configured for the alert
appears at the top of the screen.
(Click Previous if you need to return to the previous screen.)