HP Surestore 64 Director Switch - Manual (Page 56)

40 Using the Product Manager
User Rights
The HP EFC Manager’s system administrator can assign levels of access, or “User Rights,”
to Product Manager users through the HP EFC Manager application.
Note that the HP EFC Manager’s system administrator only has view rights while operating
in a specific Product Manager application. Conversely, a Product Manager’s product
administrator only has view rights while operating in the HP EFC Manager application.
Detailed instructions concerning the assignment of user rights for both the HP EFC
Manager and Product Manager applications appear in Chapter 5 of the hp enterprise fabric
connectivty manager User’s Guide ( HP A6575-90901) .
There are five levels of access or “user rights” that can be assigned to specific users:
• System Administrator
• Product Administrator
• Operator
• Maintenance
• View
By default, all users have view rights, which allow viewing but not changing configurations.
View rights cannot be removed.
The users with system administrator rights can make all control and configuration changes
implemented through the HP EFC Manager application.
User Rights for Specific Functions
Table 2 itemizes the specific functions available to Product Manager users that have been
assigned “user rights” of product administrator, operator, and/or maintenance. If a user
does not have the right to perform a specific operation, a not-authorized error box appears
when the operation is attempted.