HP LaserJet M4349 Multifunction Printer series - Manual (Page 94)

Load standard-size media in trays 2, 3, 4, and 5
NOTE: Do not load envelopes in trays 2, 3, 4, or 5. Use only tray 1 for printing on envelopes.
1. Open the tray until it stops.
2. Load the media into the tray.
NOTE: See Load letterhead, prepunched, or preprinted paper on page 85 for information about
loading preprinted, letterhead, and prepunched paper.
3. Adjust the media-length guide by pressing the tab on the guide and moving it until it touches the
media stack.
4. Adjust the media-width guide by pressing the tab on the guide and moving it until it touches the
media stack.
80 Chapter 4 Media and trays ENWW