HP LaserJet M4349 Multifunction Printer series - Manual (Page 102)

Control print jobs
When a job is sent to the printer, the printer driver controls what paper tray is used to pull media through
the printer. By default, the printer automatically selects the tray, but a specific tray can be chosen based
on three user-specified settings: Source, Type, and Size. These settings are available from the
Application Setting dialog box, the Print dialog box, or the printer driver.
Setting Description
Source Directs the printer to pull paper from a user-specified tray. The
printer tries to print from this tray, no matter what type or size
media is loaded in it. To begin printing, load the selected tray
with the correct type or size of print media for the print job. After
loading the tray, the printer begins printing. If the printer does
not begin printing:
● Verify the tray configuration matches the size or type of
the print job.
● Press OK to have the printer try to print from another tray.
Type or Size Directs the printer to pull paper or print media from the first tray
that is loaded with the type or size that you selected. Always
print by Type for special print media such as labels or
transparencies.
88 Chapter 4 Media and trays ENWW