Print quality menu, 48 chapter 2 control panel enww – HP LaserJet M4349 Multifunction Printer series User Manual
Page 62
![background image](/manuals/397332/62/background.png)
Print Quality menu
NOTE:
Values shown with "(default)" are the factory-default values. Some menu items have no default.
Table 2-15
Print Quality menu
Menu item
Sub-menu item
Values
Description
Set Registration
Test Page
(button)
Use
Set Registration
to shift the margin alignment to
center the image on the page from top to bottom and
from left to right. You can also align the image on the
front with the image printed on the back.
Print a test page for setting the registration.
Source
All trays
Tray
(choose a tray)
Select the source input tray for printing the
Set
Registration
page.
Adjust Tray
Shift from -20 to 20 along
the X or Y axes.
0
is the
default.
Perform the alignment procedure for each tray.
When it creates an image, the device scans across the
page from side to side as the sheet feeds from top to
bottom into the device.
The scan direction is referred to as X. X1 is the scan
direction for the first side of a 2-sided page. X2 is the
scan direction for the second side of a 2-sided page.
The feed direction is referred to as Y.
Fuser Modes
Configure the fuser mode associated with each media
type.
Restore Modes
Restore
(button)
Restore the fuser modes to the default settings.
Optimize
High Transfer
Normal
(default)
Increased
Optimizes certain parameters for all jobs rather than (or
in addition to) optimizing by paper path.
Line Detail
Off
(default)
On
Resolution
300
600
FastRes 1200
(default)
ProRes 1200
Use this feature to select the print resolution.
REt
Off
Light
Medium
(default)
Dark
Enable Resolution Enhancement technology (REt),
which produces print output with smooth angles,
curves, and edges. All print resolutions, including
FastRes 1200, benefit from REt.
Economode
Enabled
Disabled
When Economode is enabled, the device prints with a
reduced amount of toner per page; however, the print
quality of the page is slightly reduced.
Toner Density
Choose from a range of 1
to 5.
3
is the default.
Lighten or darken the print on the page. 1 is the lightest
and 5 is the darkest.
48
Chapter 2 Control Panel
ENWW