beautypg.com

36 chapter 2 control panel enww – HP LaserJet M4349 Multifunction Printer series User Manual

Page 50

background image

Menu item

Sub-menu item

Sub-menu item

Values and Description

Security

Print Sec Page

Yes

: Prints a page that contains the current security

settings on the HP Jetdirect print server.

No

(default): A security settings page is not printed.

Secure Web

For configuration management, specify whether the
embedded Web server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.

HTTPS Required

: For secure, encrypted

communications, only HTTPS access is accepted. The
print server will appear as a secure site.

HTTP/HTTPS optional

: Access using either HTTP or

HTTPS is permitted.

IPsec or Firewall

Specify the IPsec or Firewall status on the print server.

Keep

: IPsec/Firewall status remains the same as

currently configured.

Disable

: IPsec/Firewall operation on the print server is

disabled.

Reset Security

Specify whether the current security settings on the
print server will be saved or reset to factory defaults.

No

*: The current security settings are maintained.

Yes

: Security settings are reset to factory defaults.

Diagnostics

Embedded Test

This menu provides tests to help diagnose network
hardware or TCP/IP network connection problems.

Embedded tests help to identify whether a network fault
is internal or external to the device. Use an embedded
test to check hardware and communication paths on
the print server. After you select and enable a test and
set the execution time, you must select

Execute

to

initiate the test.

Depending on the execution time, a selected test runs
continuously until either the device is turned off, or an
error occurs and a diagnostic page is printed.

LAN HW Test

CAUTION:

Running this embedded test will erase

your TCP/IP configuration.

This test performs an internal loopback test. An internal
loopback test will send and receive packets only on the
internal network hardware. There are no external
transmissions on your network.

Select

Yes

to choose this test, or

No

to not choose it.

HTTP Test

This test checks operation of HTTP by retrieving
predefined pages from the device, and tests the
embedded Web server.

Select

Yes

to choose this test, or

No

to not choose it.

Table 2-10

Jetdirect menus (continued)

36

Chapter 2 Control Panel

ENWW