HP LaserJet M4349 Multifunction Printer series - Manual (Page 59)

Menu item Sub-menu item Sub-menu item Values Description
Stapler/Stacker Staple None
One
If the optional stapler/stacker is installed, use
this feature to set stapling characteristics for
the device.
Staples Out Continue (default)
Stop
MBM-3
Configuration Operation Mode Function Separator
Mailbox
Stacker
Use this feature to configure the optional 3-
bin mailbox accessory.
General Copy
Behavior Scan Ahead Enabled (default)
Disabled
Use this feature to turn on no-wait scanning.
With
Scan Ahead enabled, the pages in the
original document are scanned to disk and
held until the device becomes available.
Auto Print Interrupt Enabled
Disabled
When this feature is enabled, copy jobs can
interrupt print jobs that are set to print multiple
copies.
The copy job is inserted into the print queue
at the end of one copy of the print job. After
the copy job is complete, the device
continues printing the remaining copies of the
print job.
Copy Interrupt Enabled
Disabled
When this feature is enabled, a copy job that
is currently printing can be interrupted when
a new copy job is started. You are prompted
to confirm that you want to interrupt the
current job.
First Copy Speed No early warm up
Early warm up
Table 2-14 Device Behavior menu (continued)
ENWW Device Behavior menu 45