HP LaserJet M4349 Multifunction Printer series - Manual (Page 47)

Menu item Sub-menu item Sub-menu item Values and Description
IPV4 Settings Config Method Specifies the method that TCP/IPv4 parameters will be
configured on the HP Jetdirect print server.
Bootp : Use BootP (Bootstrap Protocol) for automatic
configuration from a BootP server.
DHCP : Use DHCP (Dynamic Host Configuration
Protocol) for automatic configuration from a DHCPv4
server. If selected and a DHCP lease exists,
DHCP
Release and DHCP Renew menus are available to set
DHCP lease options.
Auto IP : Use automatic link-local IPv4 addressing. An
address in the form 169.254.x.x is assigned
automatically.
Manual : Use the Manual Settings menu to configure
TCP/IPv4 parameters.
DHCP Release This menu appears if Config Method was set to
DHCP and a DHCP lease for the print server exists.
No (default): The current DHCP lease is saved.
Yes : The current DHCP lease and the leased IP
address are released.
DHCP Renew This menu appears if Config Method was set to
DHCP and a DHCP lease for the print server exists.
No (default): The print server does not request to renew
the DHCP lease.
Yes : The print server requests to renew the current
DHCP lease.
Manual Settings (Available only if Config Method is set to Manual )
Configure parameters directly from the printer control
panel:
IP Address : The unique IP address of the printer
(n.n.n.n), where n is a value from 0 to 255.
Subnet Mask : The subnet mask for the printer
(m.m.m.m), where m is a value from 0 to 255.
Syslog Server : The IP address of the syslog server
used to receive and log syslog messages.
Default Gateway : The IP address of the gateway or
router used for communications with other networks.
Idle Timeout : The time period, in seconds, after which
an idle TCP print data connection is closed (default is
270 seconds, 0 disables the timeout).
Table 2-10 Jetdirect menus (continued)
ENWW Initial Setup menu 33