HP StorageWorks XP Remote Web Console Software - Manual (Page 96)

Configuration File Loader 96
Second check starts.
Check on the written format and
the parameters are performed.
Has any error occurred?
Has any error occurred?
Settings are ready to be applied.
Yes
No
No
Yes
Logical check is performed.
Correct the settings according to the
error information listed.
Correct the settings according to the
error information listed.
Figure 5-14 Second Error Check Flow Chart
5-4-2-6 Third Error Check
The third check is performed after the Apply button is clicked. Errors detected at this level include the following:
• There is no difference between the current configuration definition and the configuration definition on the
uploaded spreadsheet. The spreadsheet is accepted, but no operation will be performed.
• The [Port] tag is on the spreadsheet, but the [CHA] tag is not, and the new port settings and the current PCB
mode settings of the [CHA] tag do not match.
• The [CHA] settings are not stated on the spreadsheet, so the error cannot be detected at the second check.
• You are trying to delete a LUN that is needed to process input/output (I/Os).
5-4-2-7 Implementing the Changes
If no errors are found on the third error check, the settings in the spreadsheet are applied to the subsystem.