2 snmp ip security tab – HP StorageWorks XP Remote Web Console Software User Manual
Page 70
Setting SNMP Agent Properties 70
4-2 SNMP IP Security Tab
The SNMP IP Security tab allows you to extend the number of LUs and cache memory using the On Demand
Storage functions. To open the SNMP IP Security tab, click Install (
) on the XP Remote Web Console main
pane. Click the SNMP IP Security tab (see Figure 4-2).
NOTE:
The option buttons (along the left side of the pane) and the subsystem information icons (in the top right
corner of the pane) have been omitted from the screen shot. See Figure 3-1 for an illustration.
Figure 4-2
SNMP IP Security Tab
The SNMP IP Security tab has the following features:
•
The Extension SNMP checkbox - selected if the SNMP Agent feature is enabled. This must be selected to
perform SNMP operations from the XP Remote Web Console.
NOTE:
This must be set from the SVP. Contact your HP account support representative for assistance.
•
The Manager section - allows you to add and delete SNMP manager information (see section 4-3-1 for
instructions).
•
The IP Address list box: Displays the IP addresses of the registered SNMP managers from which the
SNMP agent accepts requests. If no manager is registered, the SNMP agent accepts requests from all
managers. You can register up to 32 managers.
•
The IP Address text box: Enter the IP address that you want to register as an SNMP manager. The value
of each number in the IP address must be from 0 to 255 inclusive.
•
The Set button: Adds the new IP address to the IP Address list box.
•
The Community & Trap section - Add, delete, or change SNMP trap information. The registered IP address
is the trap destination for the specified community.
•
Each community can have more than one defined IP address (see sections 4-3-3 and 4-3-6 for
instructions).
•
You can register up to 32 community names and up to 32 IP addresses per community name.
•
You can use up to 180 alphanumeric characters for a community name.
•
Apply - implements the settings made on this pane.
•
Cancel - cancels the settings made on this pane.