HP StorageWorks XP Remote Web Console Software User Manual
Page 39
Performing XP Remote Web Console Operations 39
Figure 3-4
Device Information Box and Device View
•
Device Information: Product name of the connected subsystem
•
Serial Number: Serial number of the connected subsystem
•
IP Address: IP address of the connected subsystem (SVP)
•
Device Name: Device name of the connected subsystem. This can be changed if you are in Modify mode.
This is a required field (maximum 255 alphanumeric characters).
NOTE:
Do not add a space before or after the device name, or you will cause an error when you click
Apply.
NOTE:
The device name is required to use the SNMP Agent. Make sure to document the device name
because the settings are cleared if the SVP is replaced.
•
Contact: Device support contact information, such as personnel and telephone number, where you can
inquire about the connected subsystem. You can change the contact information with the Modify mode. This
is a required field (maximum 255 alphanumeric characters).
NOTE:
The contact name is required to use SNMP Agent. Make sure to document the contact name
because the settings are cleared if the SVP is replaced.
•
Device Location: Location of the connected subsystem. The XP Remote Web Console user can change the
device location when in Modify mode. This is a required field (maximum 255 alphanumeric characters).
NOTE:
The device location is required to use SNMP Agent. Make sure to document the contact name
because the settings are cleared if the SVP is replaced.
•
Firmware Version Main: Version of the microcode installed in the connected subsystem
•
Firmware Version SVP: Version of the XP Remote Web Console Java™ applet program installed in the SVP
of the connected subsystem
•
Firmware Version Server: Version of the RMI™ server installed in the SVP of the connected subsystem
•
Device View: Product name and visual image (picture) of the connected subsystem