4-2-4 first error check, 4-2-5 second error check – HP StorageWorks XP Remote Web Console Software User Manual
Page 95
Configuration File Loader 95
5-4-2-4 First Error Check
The first error check is performed when the spreadsheet file is imported. The first error check verifies that the
spreadsheet is properly formatted. If there is an error, the spreadsheet is rejected, and an error message is
displayed. Errors detected at the first check include the following:
•
The first row of the spreadsheet (the declaration line) is not correctly written, or the stated program product
is not installed. For more information on the declaration line, see section 5-2-2-1.
•
The spreadsheet file is not in text file format (the file is a binary file).
•
There is no function tag in the spreadsheet. For more information on the function tag, see section 5-2-2-2.
•
The file name is incorrect (e.g., the extension is not “.spd”, or the file name exceeds the maximum number
of letters).
•
The number of letters in a row exceeds 128.
•
The number of rows in a spreadsheet exceeds 70,000.
If the spreadsheet includes errors, either an error message is displayed or error information is listed in the Error
Information list. Revise the spreadsheet according to the error messages, and then upload the corrected
spreadsheet file.
5-4-2-5 Second Error Check
In the second check, the spreadsheet settings are verified. Any errors found are displayed on the Error
Information list. This second check is performed before the Apply button becomes available. Figure 5-14 shows
the flow of the second check.
The second error check is performed only when no error is found by the first error check. The current settings are
compared to the uploaded settings and checked for logical consistency.
NOTE:
certain errors can only be detected by the third check.
Errors detected at the second level include the following:
•
A function tag is not supported.
•
A setting value is incorrect or omitted.
•
The setting range is incorrect. The correct ranges are as follows:
•
CU: 00 - 1F
•
LDEV: 00 - FF
•
LUN: 00 - FF
•
Group ID: 00 - 7F
•
Host Mode: 00 - 1F
When you upload a spreadsheet with no errors detected, the pane displays Ready above the error information
list, and the Apply button becomes available.