HP 3PAR Application Software Suite for Oracle - Manual (Page 176)

RMO_ERROR_NONE_RCVV_FOUND
MESSAGE
3PAR1109: ERROR: There is no Remote Copy volumes found on HP 3PAR StoreServ Storage system
.
REASON
Could not find any volumes used by Remote Copy from the specified HP 3PAR StoreServ Storage
system.
SOLUTION
Check if Remote Copy is configured correctly. Make sure all parameters from the configuration
file are up to date. Check if volumes used by datafiles and archive log files are within Remote
Copy groups.
MESSAGE ID
1110
SYMBOLIC NAME
RMO_ERROR_PROCESS_INPROGRESS
MESSAGE
3PAR1110: ERROR: Another %s process is in progress.
If there is no other process for this database running, remove the lock file and
try again.
REASON
At any time, only one rmora_backup or rmora_create or rmora_rsync operation can be
run against one database. Once the operation is finished, the lock file will be automatically removed
by these commands.
SOLUTION
If the lock file still exists and you are sure there are no other similar commands running against
this database, you can remove the lock file manually and restart the operation. Otherwise, you
need to wait till the last operation finishes.
MESSAGE ID
1111
SYMBOLIC NAME
RMO_ERROR_BACKUP_INPROGRESS
MESSAGE
3PAR1111: ERROR: Another backup process is in progress.
If there is no other backup process for this database running, remove the lock file and try
again.
REASON
Some Recovery Manager for Oracle commands (create, backup, or rsync) are designed to be
executed sequentially. The command has to wait until the previous similar command finishes to
obtain a lock for its exclusive time.
SOLUTION
Try the operation at a later time. If you are certain that there are no similar operations going on,
remove the lock file specified on the screen as it could be a result from a previous inappropriate
or corrupted operation.
MESSAGE ID
1112
SYMBOLIC NAME
176 Troubleshooting