HP 3PAR Application Software Suite for Oracle - Manual (Page 166)

MESSAGE ID
1032
SYMBOLIC NAME
RMO_ERROR_OSDEVS_NOTFOUND
MESSAGE
3PAR1032: ERROR: Could not find OS devices for virtual volumes
REASON
The command rmora_mount or rmora_umount failed to find the OS device associated with
the specified read-write virtual volume.
SOLUTION
Make sure the configuration on the backup server is supported, such as a multipath configuration,
and make sure related daemons are up. If the Host Bus Adaptor (HBA) card is not QLogic, Emulex,
or iSCSI (refer to the HP 3PAR configuration matrix), manually add or remove devices from the
OS as needed.
MESSAGE ID
1037
SYMBOLIC NAME
RMO_ERROR_RETENT_LONGERTHAN_EXP
MESSAGE
3PAR1037: ERROR: Retention time is longer than expiration time .
REASON
When performing rmora_create or rmora_rsync, the specified retention time is longer than
the expiration time.
SOLUTION
Make sure the expiration time is longer than the retention time. If the retention time or expiration
time is not specified from the command line, get the value from the configuration file.
MESSAGE ID
1047
SYMBOLIC NAME
RMO_ERROR_INITIATE_ROLLBACK_SV
MESSAGE
3PAR1047: ERROR: Could not initiate rollback process for snapshot volume .
REASON
The HP 3PAR CLI command promotesv failed.
SOLUTION
Make sure the HP 3PAR StoreServ Storage system is functioning correctly. Contact customer support
for further investigation.
MESSAGE ID
1048
SYMBOLIC NAME
RMO_ERROR_ARCHDEST_ERROR
MESSAGE
3PAR1048: ERROR: One or more archivelog destinations have error status.
REASON
166 Troubleshooting