HP Latex 3000 Printer - Manual (Page 92)

NOTE: To compensate for any possible registration errors that may occur, centering the
images is highly recommended.
● For side B you can define the following and also review all of the above properties:
◦ Rows to Register: This option enables you to choose which registration lines are scanned by
the printer, if you select 1 (the default), the printer stops printing and checks every
registration line, if you select a higher number, for example 2, the printer only scans every
second registration line. This increases the speed of the job, but also slightly increases the
chances of misregistration.
◦ Rotate: This option enables you to rotate the image 180 o .
3. In the Layout tab are the following options, we recommend using these options when printing double-
sided:
● Side B calibration space: When this check box is selected the printer leaves an area of substrate
empty after the images have been printed (the substrate is warmed-up). This is to give space to
perform substrate-advance compensation on side B, which is recommended. At the end of the
empty space a dotted line is printed.
● Side B loading space: When this check box is selected the printer will advance the substrate so
that there is sufficient substrate to load side B.
Preview (Image/Layout/Preview both)
There are three different previews:
1. Click the Image button and preview the selected images.
86 Chapter 4 Create and manage print jobs ENWW