HP Latex 3000 Printer - Manual (Page 71)

2. Collect the substrate onto the output spindle. Check the substrate is collecting correctly on to the
spindle to avoid telescoping.
3. Remove the input spindle.
4. Remove the output spindle (1), carry it around to the input side with the same orientation (2) and install
it into the input position (3). Maintain the same orientation: Left edge always on the left, as indicated
below with the colors blue and red.
5. When completed, click Done in the IPS window to confirm.
Side B: Load and print
1. Load roll-to-roll configuration: see Load a roll (roll-to-roll configuration) on page 45 .
NOTE: By default the left edge of the substrate is detected to minimize registration errors along the
scan axis when printing double-sided. When printing on translucent substrates or types of substrate
with irregular edges you can disable this option by clicking Substrate Edge Detection.
ENWW Double-sided printing 65