HP Latex 3000 Printer - Manual (Page 254)

Wipe the ribs of the ink collector modules
1. Wipe the ribs of the ink collector modules with a lint-free cloth dampened with isopropyl alcohol.
NOTE: If you are in an area (such as California) that regulates VOC cleaning and maintenance fluids,
instead of isopropyl alcohol use a VOC-certified cleaner such as a properly diluted Simple Green All-
Purpose Cleaner.
2. Close the front door.
Wipe the protector
While you have the protector out of the printer, wipe all surfaces and check the ribs.
Wipe the ink collector modules
While you have the ink collector modules out of the printer, wipe all dirty surfaces. If necessary, replace the
foams: see
Replace the ink collector foams on page 251 .
CAUTION: Proper maintenance and genuine HP consumables are required to ensure that the printer
operates safely as designed. The use of non-HP consumables (foams, filters, printhead cleaner roll, or inks)
may present a risk of fire.
Printer maintenance
First ensure that you have turned the printer off, and be careful to follow the appropriate safety precautions.
248 Chapter 8 Hardware maintenance ENWW