HP Latex 3000 Printer - Manual (Page 143)

HP Latex 3000 Printer Cleaning Kit contents
Part Quantity Use in maintenance
Flex cleaner and 12 flex sponges 1 Clean printhead contacts, printhead side (see The Internal Print Server
recommends replacing or reseating a printhead on page 285 )
Brush 1 Clean printhead contacts, carriage side (see The Internal Print Server
recommends replacing or reseating a printhead on page 285 )
Cotton swabs 100 Clean the substrate advance sensor (OMAS) (see Clean the substrate-
advance sensor on page 202 ) and the line sensor (see Clean the bottom of
the carriage, the drying glasses, and the line sensor on page 150 )
Carriage rail cleaning wicks 6 bags of 20 Cleaning (see Clean the carriage rails and replace the oiler foams
on page 160 )
Lubricant oil 3 bottles of 10
ml
Lubrication (see Clean the carriage rails and replace the oiler foams
on page 160 )
Oiler foams 6 bags of 2 Replacement (see Clean the carriage rails and replace the oiler foams
on page 160 )
Oiler wicks 6 sets Replacement (see Clean the carriage rails and replace the oiler foams
on page 160 )
Grease syringe 3 ml Grease small parts; but not for greasing carriage beam screws
Cleaning sponges 6 General cleaning
Plastic gloves 6 sets General maintenance processes
E-cabinet and e-box filters 6 sets of 2 Fan filters replacement (see Replace the e-cabinet fan filters on page 180 )
NOTE: The contents of the kit may vary.
NOTE: Some keys are provided with the printer. See Safety precautions on page 2 to identify the one you
may require for maintenance operations.
Use the keys only for accessing the intended doors and keep them always under your control. Store them in a
safe and secure place.
Maintenance tools recommended but not provided
● Spiral steel scourer, for Clean the bottom of the carriage, the drying glasses, and the line sensor
on page 150 ; Replace the drying lamps on page 188 ; and Clean the ink deposits on page 156
ENWW Maintenance resources 137