Replace the ink collector foams – HP Latex 3000 Printer User Manual

Page 257

Diverter interwheels

Wipe the diverter interwheels with a lint-free cloth dampened with isopropyl alcohol, and make sure
that the platen is dry before printing.

NOTE:

If you are in an area (such as California) that regulates VOC cleaning and maintenance fluids,

instead of isopropyl alcohol use a VOC-certified cleaner such as a properly diluted Simple Green All-
Purpose Cleaner.

Close the curing module and the front door.

Replace the ink collector foams

TIP:

Do this away from the printer to avoid ink dripping on the printer.

Slide out the dirty old foams.

NOTE:

Consult your local authorities to determine the correct manner in which to dispose of them.

ENWW

Replace the ink collector foams 251