West Control Solutions 8700+ - Manual (Page 72)

1 /
4
-DIN, 1 /
8
-DIN & 1 /
16
- DIN Controllers & Indicators - Product Manual
59305, Issue 7
– March 2014 P6170, P8170 & P4170 Model Group Page 67
Parameter Lower
Display Upper
Display Description Default
Value
When
Visible
Process High
Alarm 1 value*  Range Min. to Range Max.
Parameter repeated in Setup Mode Range
Max.
=

Process Low
Alarm 1 value*  Range Min. to Range Max
Parameter repeated in Setup Mode Range
Min.
=

Deviation
Alarm 1 Value* 

span from setpoint
Parameter repeated in Setup Mode

=

Band Alarm 1
value*  1 LSD to full span from setpoint.
Parameter repeated in Setup Mode 
=

Alarm 1
Hysteresis*  1 LSD to 100% of span (in display units)
on “safe” side of alarm point.
Parameter repeated in Setup Mode  Always
Alarm 2 Type  As for alarm 1 type  Always
Process High
Alarm 2 value*  Range Min. to Range Max.
Parameter repeated in Setup Mode
Range
Max.
=

Process Low
Alarm 2 value*  Range Min. to Range Max.
Parameter repeated in Setup Mode Range
Min.
=

Deviation
Alarm 2 Value* 

span from setpoint.
Parameter repeated in Setup Mode
 =

Band Alarm 2
value*  1 LSD to full span from setpoint.
Parameter repeated in Setup Mode 
 =
 
Alarm 2
Hysteresis*  1 LSD to 100% of span (in display units)
on “safe” side of alarm point.
Parameter repeated in Setup Mode  Always
Loop Alarm
Enable   (disabled) or
 (enabled)  Always
Alarm Inhibit   No alarms Inhibited  Always
 Alarm 1 inhibited
 Alarm 2 inhibited
 Alarm 1 and alarm 2
inhibited