Thermo Fisher Scientific CyberScan DO 600 User Manual

Wp 600 series meters, Integrated instruction manual

This manual is related to the following products:

CyberScan COND 600/610 CyberScan pH 600/610/620 CyberScan CD 650 CyberScan PD 650 CyberScan PC 650 CyberScan PCD 650

Table of contents

Document Outline

1. Overview For All Meters
- 1.1 About the Meters
  - 1.1.1 Display Overview
  - 1.1.2 Key Functions
- 1.2 Inserting Batteries
  - 1.2.1 Inserting batteries for the first time
  - 1.2.2 Changing batteries subsequently
- 1.3 Attaching the Belt
- 1.4 Connecting Peripherals
  - 1.4.1 Probes (pH/Conductivity/DO)
  - 1.4.2 Protective Rubber Boot
2. System Setup Mode For All Meters
- 2.1 About Setup Mode
- 2.2 Accessing Setup mode
- 2.3 Setup Selection: System Settings
- 2.4 Accessing Setup mode when password protection enabled
- 2.5 Modifying Setup parameters
3. Calibration Mode For All Meters
- 3.1 About Calibration
- 3.2 About Conductivity/ Resistivity/ TDS/ Salinity Calibration
- 3.3 Preparing the Meter for Calibration
- 3.4 Accessing Calibration mode
  - 3.4.1 Accessing Calibration mode when password protection enabled
4. Measurement Mode For All Meters
- 4.1 About Measurement Mode
  - 4.1.1 Accessing functions
- 4.2 Taking Measurements
- 4.3 Automatic Temperature Compensation (ATC)
  - 4.3.1 Manual Temperature Compensation (MTC)
- 4.4 Alarm set point (For pH/conductivity/DO)
- 4.5 Calibration Due (CAL-DUE) Indicator (For pH/conductivity/DO)
5. TRANSFERRING AND PRINTING DATA
- 5.1 CyberComm 600 Data Acquisition Software
- 5.2 Working with Memory functions – Auto Data Logging
6. Technical Specifications
7. Accessories
8. Warranty & Return Policy
- 8.1 Warranty
- 8.2 Return of Goods
- 8.3 Guidelines for Returning Unit for Repair
1. Temperature Setup
2. Temperature Calibration
- 2.1 About Temperature Calibration
- 2.2 Temperature Calibration for ATC mode
- 2.3 Temperature Calibration for MTC mode
3. Temperature Measurement
1. pH Setup
2. pH Calibration
- 2.1 About pH Calibration
- 2.2 pH buffer group for calibration and auto-recognition
  - 2.2.1 pH Calibration points
- 2.3 pH Calibration with a Standard Buffer
  - 2.3.1 To start pH Calibration:
- 2.4 pH Calibration with a User-defined Buffer
- 2.5 Calibration Report
  - 2.5.1 To View Calibration Report:
- 2.6 Average Slope Indicator of pH Probe
3. pH Measurement Mode
- 3.1 Resolution of pH Reading
- 3.2 Indicators in pH measurement screen
1. mV Setup Mode
2. mV Calibration Mode
- 2.1 mV Calibration with a Standard ORP Calibration Solution
- 2.2 Calibration Report
  - 2.2.1 To View Calibration Report:
3. mV Measurement Mode
- 3.1 Indicators in mV measurement mode
1. Ion Setup
2. Ion Calibration Mode
- 2.1 About Ion Calibration
- 2.2 Calibration Report
  - 2.2.1 To View Calibration Report
3. Ion Measurement Mode
- 3.1 Changing unit of measurement
- 3.2 Indicators in Ion measurement mode
1. Conductivity Setup
2. Conductivity Calibration Mode
- 2.1 Conductivity Calibration mode
  - 2.1.1 Conductivity calibration points
- 2.2 Cell constant
- 2.3 Normalization Temperature ((C)
- 2.4 Linear Temperature Coefficient
- 2.5 Pure Water Coefficient
- 2.6 To begin Calibration
- 2.7 Manual Calibration
- 2.8 Automatic Calibration (For Conductivity Calibration)
- 2.9 Calibration Report
  - 2.9.1 To View Calibration Report:
3. Conductivity Measurement Mode
- 3.1 Indicators in Conductivity measurement screen
1. TDS Setup
2. TDS Calibration Mode
- 2.1 TDS Calibration Report
  - 2.1.1 To View Calibration Report:
3. TDS Measurement Mode
- 3.1 Indicators in TDS measurement mode
4. About TDS
- 4.1 Calculating TDS Conversion Factor
- 4.2 Calculating Temperature Coefficients
1. Salinity Setup
2. Salinity Calibration Mode
- 2.1 Salinity Calibration Report
  - 2.1.1 To View salinity Report:
3. Salinity Measurement Mode
- 3.1 Indicators in salinity measurement mode
1. Resistivity Setup
2. Resistivity Calibration Mode
- 2.1 Resistivity Calibration Report
  - 2.1.1 To View Calibration Report:
3. Resistivity Measurement Mode
- 3.1 Indicators in Resistivity measurement mode
1. O2 % - DO Saturation Setup
2. DO Calibration in % Saturation Mode (with ATC)
- 2.1 About DO(%) and DO (mg/L) Calibration
- 2.2 To calibrate 100% saturation
- 2.3 To calibrate 0% saturation
  - 2.3.1 % DO Calibration Report
  - 2.3.2 To View Calibration Report:
- 2.4 % Saturation Offset Adjustment
- 2.5 Set barometer pressure range and barometric pressure units
- 2.6 Pressure compensation
3. Percentage Saturation (%) Measurement Mode
- Indicators in percentage saturation measurement mode
1. O2 mg/L (ppm) – DO Concentration Setup
2. DO Calibration in mg/L mode or ppm Concentration mode
- 2.1 Concentration Calibration Report
  - 2.1.1 To View Calibration Report:
- 2.2 Set Salinity
  - 2.2.1 Auto Salinity Compensation
3. Concentration in Measurement Mode
- 3.1 Indicators in concentration measurement screen
- 3.2 Dissolved Oxygen Probe