Thermo Fisher Scientific CyberScan DO 600 - Manual (Page 19)

11
System Settings Page 2 – Date & Time
Figure 3 : System Settings Page 2 – Date & Time
This page allows you to set the date & time of the meter.
Parameter Description Factory Default
Year
Sets the current year
2006
Month
Sets the current month
Jan
Date
Sets the current date
01
Hour
Sets the hour (24 Hours) for the current time
00
Minute
Sets the minute for the current time
00
Second
Sets the second for the current time
00
System Settings Page 3 – Auto-Off & Backlight
Figure 4 : System Settings Page 3 – Auto-Off & Backlight
This page allows you to set auto-off and back light related parameters.
Parameter Description Factory Default
Auto OFF
ENABLE – Turns the meter off automatically if no key is
pressed for the time period specified in ‘ON TIME’ below.
However, this will happen only if you are using the battery,
NOT when the meter is plugged into an AC power source
or when it is printing data.
ENABLE