Thermo Fisher Scientific CyberScan DO 600 - Manual (Page 94)

86
2.1 Salinity Calibration Report
Calibration report gives you information on calibration. It includes date & time of
the last calibration and the cal factor.
2.1.1 To View salinity Report:
1. From salinity measurement mode, press left or right arrow key to
navigate to other available functions until you see REPO function in the LCD
2. Press REPO (F2) key. The calibration report is shown in the display.
3. Press PRIN (F2) to transfer the calibration report to the computer.
Figure 42 : Salinity Report Screen