Thermo Fisher Scientific CyberScan DO 600 - Manual (Page 119)

111
pressure/oxygen concentration relationship of your sample. The salinity
can be set from 0 to 50 ppt.
2.2.1 Auto Salinity Compensation
If auto salinity comp. is enabled, the meter will automatically compensate
for salinity for determining dissolved oxygen concentration of the sample.
Auto salinity compensation will be applicable only in multi measurement
mode and only if one of the measurement selected is conductivity
related. This option is activated only in CD650 & PCD650. Otherwise,
a manually set salinity value will be applied.
3. Concentration in Measurement Mode
In concentration measurement mode, the meter displays concentration and
temperature readings. The LCD shows related information for the
concentration measurement such as temperature compensation mode, stable
indicator, salinity value, probe condition, response time of the DO probe and
alarm conditions. You can customize or enable/disable some of these
indicators in the Setup mode.
3.1 Indicators in concentration measurement screen
Figure 61 :Concentration Measurement Screen
Item Description
1 Measurement mode indicator
2 Appears when the reading is stable
3 Appears when the reading is on hold
4 Concentration reading
1
4
6
6
3
2
11
7
8
9
10
5