Alcatel-Lucent 8950 AAA - Manual (Page 202)

............................................................................................................................................................................................................................................................
Modifying a System Operator Configuring 8950 AAA Operators
11-16 365-360-001R6.0
Issue 1, December 2008
............................................................................................................................................................................................................................................................
2. After selecting the access level, the access rule is complete.
Click OK to save and return to the Operator Properties tab
OR
Click Cancel to return without saving.
Result: The Operator Properties tab appears with the new rule.
Add additional Access rules as necessary.
Important! Access Rules are applied in order, the first matching rule is selected. You
should place more general rules near the bottom and more specific rules near the top of
the list of rules.
Modifying a System Operator
How to modify a System Operator
The following procedure lists the steps for changing the attributes of a System Operator.
1. From the Operators tab on the 8950 AAA Operators panel, select the operator to be
modified.
2. Double click on the operator or select the Edit selected record panel control button.
Result: The Operator Properties screen appears with the current information about the
selected operator as shown in Figure 11-13 .
Command On Allows command execution
Off Denies command execution
Role On Allows access to a particular role for
methods execution
Off Denies access for method execution
Table 11-8 Access Rules–Access Type and Access Level Components
Access Type Access Level Description