Pyromation T82 - Manual (Page 78)

Operating menu and parameter description T82
78
User input • For a system in accordance with HART 5.0:
0 to 15
• For a system in accordance with HART 6.0:
0 to 63
Factory settings 0
Additional information The measured value can only be transmitted via the current value is the address is set to "0". The
current is fixed at 4.0 mA for all other addresses (Multidrop mode).
No. of preambles
Navigation Expert ® Communication ® HART configuration ® No. of preambles
Description Use this function to define the number of preambles in the HART telegram.
User input 2 ... 20
Factory settings 5
Burst mode
Navigation Expert ® Communication ® HART configuration ® Burst mode
Description Use this function to switch the HART burst mode on or off.
Options: • Off
The device only sends data to the bus at the request of a HART master.
• On
The device regularly sends data to the bus without being requested to do so.
Factory settings Off
Burst command
Navigation Expert ® Communication ® HART configuration ® Burst command
Prerequisite This parameter can only be selected if the Burst mode option is enabled.
Description Use this function to select the command whose response is sent to the HART master in the burst
mode.