Pyromation T82 - Manual (Page 10)

Installation instructions T82
10
Item B Mounting in a field housing
4 Circlips
5 Field housing
Procedure mounting in a field housing, item B:
1. Open the cover (1) of the field housing (5).
2. Fit the mounting springs on the mounting screws (2) and guide the screws through the side
boreholes of the head transmitter (3). Then fix both mounting screws with the snap rings
(4).
3. Screw the head transmitter to the field housing.
4. After wiring, (® ä 13) screw the field housing cover (1) back on.
Item C Mounting on top-hat rail (top-hat rail as per IEC 60715)
1 Mounting screws with springs
2 Head transmitter
3 Circlips
4 DIN rail clip
5 DIN rail
Procedure mounting on top-hat rail, item C:
1. Press the DIN rail clip (4) onto the top-hat rail (5) until it engages with a click.
2. Fit the mounting springs on the mounting screws (1) and guide the screws through the side
boreholes of the head transmitter (2). Then fix both mounting screws with the snap rings
(3).
3. Screw the head transmitter (2) onto the DIN rail clip (4).
4.3.2 Mounting typical of North America
1 2 3 4 5
6 5
6
A0008520
å 3 Head transmitter mounting
1 Thermowell
2 Insert
3 Adapter, coupling
4 Terminal head
5 Head transmitter
6 Mounting screws