Pyromation T82 - Manual (Page 74)

Operating menu and parameter description T82
74
8. If special linearization is also used for a second sensor, repeat steps 2 to 6.
ß
9. End
Sensor n lower limit
Navigation Expert ® Sensor® Sensor n ® Linearization ® Sensor n lower limit
Prerequisite The RTD platinum, RTD poly nickel or RTD polynomial copper option is enabled in the Sensor
type parameter.
Description Use this function to set the lower calculation limit for special sensor linearization.
User input Depends on the sensor type selected.
Factory settings -200 °C
Sensor n upper limit
Navigation Expert ® Sensor ® Sensor n ® Linearization ® Sensor n upper limit
Prerequisite The RTD platinum, RTD poly nickel or RTD polynomial copper option is enabled in the Sensor
type parameter.
Description Use this function to set the upper calculation limit for special sensor linearization.
User input Depends on the sensor type selected.
Factory settings 850 °C
Call./v. Dusen coeff. R0
Navigation Expert ® Sensor ® Sensor n ® Linearization ® Call./v. Dusen coeff. R0
Prerequisite The RTD platinum (Callendar/Van Dusen) option is enabled in the Sensor type parameter.
Description Use this function to set the R0 value for linearization with the Callendar/Van Dusen polynomial.
User input 40.000 to 1 050.000
Factory settings 100.000 Ohm