Pyromation T82 - Manual (Page 60)

Operating menu and parameter description T82
60
Measuring mode
Navigation Setup ® Advanced setup ® Current output® Measuring mode
Expert ® Output ® Measuring mode
Description Enables the inversion of the output signal.
Additional information • Standard
The output current increases with increasing temperatures
• Inverse
The output current decreases with increasing temperatures
Options: • Standard
• Inverse
Factory settings Standard
Out of range category
Navigation Setup ® Advanced setup ® Current output® Out of range category
Expert ® Output ® Out of range category
Description Use this function to select the category (status signal) as to how the device reacts when the value
is outside the set measuring range.
Options: • Out of specification (S)
• Maintenance required (M)
• Failure (F)
Factory settings Maintenance required (M)
Failure mode
Navigation Setup ® Advanced setup ® Current output® Failure mode
Expert ® Output ® Failure mode
Description Use this function to select the signal on alarm level of the current output in the event of an error.
Additional information If Max. is selected, the signal on alarm level is specified using the Failure current parameter.
Options: • Min.
• Max.
Factory settings Max.