Pyromation T82 - Manual (Page 70)

Operating menu and parameter description T82
70
13.4 "Expert" menu
The parameter groups for the Expert setup contain all the parameters of the "Display/operation",
"Setup" and "Diagnostics" operating menus, as well as other parameters that are solely reserved
for experts.
13.4.1 "System" submenu
Damping
Navigation Expert ® System ® Damping
Description Use this function to set the time constant for current output damping.
User input 0 to 120 s
Factory settings 0.00 s
Additional information The current output reacts with an exponential delay to fluctuations in the measured value. The
time constant of this delay is specified by this parameter. If a low time constant is entered, the
current output reacts quickly to the measured value. On the other hand, if a high time constant is
entered, the current output reaction is delayed.
Alarm delay
Navigation Expert ® System ® Alarm delay
Description Use this function to set the delay time during which a diagnostics signal is suppressed before it is
output.
User input 0 to 5 s
Factory settings 2 s
Mains filter
Navigation Expert ® System ® Mains filter
Description Use this function to select the mains filter for A/D conversion.
Options: • 50Hz
• 60Hz
Factory setting 50Hz