Pyromation T82 - Manual (Page 41)

T82 Operating menu and parameter description
41
13 Operating menu and parameter description
The following table lists all parameters the menus "Display/operation, Setup, Diagnostics and
Expert" may contain. The page number refers to where a description of the parameter can be
found.
Depending on the device version and parametrization some parameters will not be available
in a given situation. For details on the conditions refer to the "Prerequisite" category in the
description of the respective parameter. All the configuration options of the menus "Display/
operation, Setup, Diagnostics" are available in the "Expert" setup mode as well as additional
parameters that are reserved for experienced users.
This symbol marks the navigation path to the parameter via an operating tool (e.g.
FieldCare).
Display/operation
® Display interval (® ä 47)
Format display (® ä 47)
Value 1 display (® ä 48)
Decimal places 1 (® ä 48)
Value 2 display (® ä 49)
Decimal places 2 (® ä 49)
Value 3 display (® ä 50)
Decimal places 3 (® ä 50)
Setup ® Unit (® ä 51)
Sensor type 1 (® ä 51)
Connection type 1 (® ä 51)
2-wire compensation 1 (® ä 52)
Reference junction 1 (® ä 52)
RJ preset value 1 (® ä 52)
Sensor type 2 (® ä 51)
Connection type 2 (® ä 51)
2-wire compensation 2 (® ä 52)
Reference junction 2 (® ä 52)
RJ preset value 2 (® ä 52)
Assign current output (PV) (® ä 53)
Lower range value (® ä 53)
Upper range value (® ä 54)
Setup ® Advanced setup ® Device tag (® ä 56)
Enter access code (® ä 55)
Access status tooling (® ä 55)
Device temperature Alarm (® ä 56)
Locking status (® д 56)