Pyromation T82 - Manual (Page 58)

Operating menu and parameter description T82
58
Options: • Off
• Out band (drift)
• In band
Factory settings Off
Drift/difference alarm category
Navigation Setup ® Advanced setup ® Sensor ® Drift/difference alarm category
Expert ® Sensor ® Diagnostic settings ® Drift/difference alarm category
Prerequisite The Drift/difference mode parameter must be activated with the Out band (drift) or In band
option.
Description Use this function to select the category (status signal) as to how the device reacts when a drift/
difference is detected between sensor 1 and sensor 2.
Options: • Out of specification (S)
• Maintenance required (M)
• Failure (F)
Factory settings Maintenance required (M)
Drift/difference set point
Navigation Setup ® Advanced setup ® Sensor ® Drift/difference set point
Expert ® Sensor ® Diagnostic settings ® Drift/difference set point
Prerequisite The Drift/difference mode parameter must be activated with the Out band (drift) or In band
option.
Description Use this function to configure the maximum permissible measured value deviation between
sensor 1 and sensor 2 which results in drift/difference detection.
Options: 1.0...999.0
Factory settings 999.0
Sensor switch set point
Navigation Setup ® Advanced setup ® Sensor ® Sensor switch set point
Expert ® Sensor ® Diagnostic settings ® Sensor switch set point
Description Use this function to set the threshold value for sensor switching (® д 53).