Pyromation T82 - Manual (Page 68)

Operating menu and parameter description T82
68
Description Use this function to display the maximum electronics temperature measured in the past
(maximum indicator).
Device temperature min.
Navigation Diagnostics ® Measured values ® Min/max values ® Device temperature min.
Expert ® Diagnostics ® Measured values ® Min/max values ® Device temperature
min.
Description Use this function to display the minimum electronics temperature measured in the past
(maximum indicator).
Reset device temp. min/max values
Navigation Diagnostics ® Measured values ® Min/max values ® Reset device temp. min/max
values
Expert ® Diagnostics ® Measured values ® Min/max values ® Reset device temp.
min/max values
Description Resets the maximum indicators for the minimum and maximum electronic temperatures
measured.
Options: • No
• Yes
Factory settings No
13.3.5 "Simulation" submenu
Simulation current output
Navigation Diagnostics ® Simulation ® Simulation current output
Expert ® Diagnostics ® Simulation ® Simulation current output
Description Use this function to switch simulation of the current output on and off. The display alternates
between the measured value and a diagnostics message of the "function check" category (C) while
simulation is in progress.
Display Measured value display « C491 (simulation current output)
Options: • Off
• On
Factory settings Off