Pyromation T82 - Manual (Page 66)

Operating menu and parameter description T82
66
Description Use this function to display the order code of the device. It can also be found on the nameplate.
The order code is generated from the extended order code, which defines all the device features
of the product structure. In contrast, the device features cannot be read directly from the order
code.
Uses of the order code
• To order an identical spare device.
• To identify the device quickly and easily, e.g. when contacting the supplier.
Configuration counter
Navigation Diagnostics ® Device information ® Configuration counter
Expert ® Diagnostics ® Device information ® Configuration counter
Description Use this function to display the counter reading for changes to device parameters.
Static parameters, whose values change during optimization or configuration, cause this
parameter to increment by 1. This supports parameter version management. If several
parameters change, e. g. due to loading of parameters from FieldCare, etc. in the device, the
counter can show a higher value. The counter can never be reset and is not reset to a default
value after a device reset. If the counter overflows, (16 bit), it starts again at 1.
13.3.4 "Measured values" submenu
Sensor n value
n = Stands for the number of sensor inputs (1 and 2)
Navigation Diagnostics ® Measured values ® Sensor n value
Expert ® Diagnostics ® Measured values ® Sensor n value
Description Use this function to display the current measured value at the sensor input.
Device temperature
Navigation Diagnostics ® Measured values ® Device temperature
Expert ® Diagnostics ® Measured values ® Device temperature
Description Use this function to display the current electronics temperature.