KROHNE IFC 210 E-EEx EN - Manual (Page 95)

05/2002 IFC 210 E 95
,I\RXQHHGWRUHWXUQIORZPHWHUVIRUWHVWLQJ
RUUHSDLUWR.52+1(
Your electromagnetic flowmeter
•
has been carefully manufactured and tested
by a company with ISO 9001 certification
•
and volumetrically calibrated in one of the
world’s most accurate test rigs.
If installed and operated in accordance with these
operating instructions, your flowmeter will rarely
present any problems.
Should you nevertheless need to return a
flowmeter for checkout or repair, please pay strict
attention to the following points:
Due to statutory regulations concerning protection
of the environment and the health and safety of
our personnel, KROHNE may only handle, test
and repair returned flowmeters that have been in
contact with liquids if it is possible to do so
without risk to personnel and environment. This
means that KROHNE can only service your
flowmeter if it is accompanied
by a certificate in line with the following model
confirming that the flowmeter is safe to handle.
If the flowmeter has been operated with toxic,
caustic, flammable or water-endangering liquids,
you are kindly requested
•
to check and ensure, if necessary by rinsing or
neutralizing, that all cavities in the flowmeter
are free from such dangerous substances.
(Directions on how you can find out whether
the primary head has to be opened and then
flushed out or neutralized are obtainable from
KROHNE on request.)
•
to enclose a certificate with the flowmeter
confirming that the flowmeter is safe to handle
and stating the liquid used.
KROHNE regret that they cannot service your
flowmeter unless accompanied by such a
certificate.
SPECIMEN certificate
Company: .......................................................... Address: ................................................................
Department: ....................................................... Name: ....................................................................
Tel. No.: ............................................................. Fax-No.: .................................................................
The enclosed electromagnetic flowmeter
Type: .................................................................. .:..............................................................................
KROHNE Order No. or Series No.: ................... ................................................................................
has been operated with the following liquid: .........
................................................................................
Because this liquid is
water-endangering * / toxic * / caustic * / flammable *
we have
- checked that all cavities in the flowmeter are free from such substances *
- flushed out and neutralized all cavities in the flowmeter *
(* delete if not applicable)
We confirm that there is no risk to man or environment through any residual liquid contained in
this flowmeter.
Date: .................................................................... Signature: ............................................................
..............................................................................
Company stamp: