KROHNE IFC 100 Converter EN - Manual (Page 99)

DESCRIPTION OF HART INTERFACE
9
99
IFC 100
www.krohne.com 07/2010 - 4000041004 - MA IFC 100 R04 en
9.8.2 Operation
Due to PDM requirements and conventions, there are differences when operating the signal
converter with PDM and operating using the local keyboard. Service menu parameters are not
supported and a simulation is only possible for current outputs. The online help for each
parameter contains its function number as a reference to the device’s local display.
Parameter protection for custody transfer is the same as on the device's local display. Other
specific protective functions such as the passwords for the quick setup menu and the setup
menu are not supported with HART
® .
9.8.3 Parameter for the basic configuration
The counter measurements and the diagnosis values can be set directly in the PDM offline table.
The dependent unit parameters are automatically updated. However, automatic updating is not
possible in online dialogues of the PDM parameter table.
INFORMATION!
For more detailed information see Appendix C, Menu tree for PDM.
.book Page 99 Friday, July 9, 2010 12:29 PM