KROHNE IFC 100 Converter EN - Manual (Page 77)

TECHNICAL DATA
8
77
IFC 100
www.krohne.com 07/2010 - 4000041004 - MA IFC 100 R04 en
8.2 Technical data
INFORMATION!
•
The following data is provided for general applications. If you require data that is more
relevant to your specific application, please contact us or your local representative.
• Additional information (certificates, special tools, software,...) and complete product
documentation can be downloaded free of charge from the website (Download Center).
Measuring system
Measuring principle Faraday's law of induction
Application range Continuous measurement of current volume flow, flow velocity, conductivity, mass
flow (at constant density), coil temperature of the measuring sensor
Design
Modular design The measuring system consists of a measuring sensor and a signal converter.
Measuring sensor Measuring sensor Measuring sensor Measuring sensor
OPTIFLUX 1000 DN10...150 / 3/8…6"
OPTIFLUX 2000 DN25...1200 / 1…48"
OPTIFLUX 4000 DN2.5...1200 / 1/10…48"
OPTIFLUX 5000 Flange: DN15...300 / ½…12"
Sandwich: DN2.5...100 / 1/10…4"
OPTIFLUX 6000 DN2.5...150 / 1/10…6"
WATERFLUX 3000 DN25...600 / 1...24"
With the exception of the OPTIFLUX 1000 and WATERFLUX 3000 all measuring
sensors are also available in an Ex-version.
Signal converter Signal converter Signal converter Signal converter
Compact version (C) IFC 100 C (0° & 45° version)
Remote version (W) IFC 100 W
All signal converters are also available in Ex-versions.
Options Options Options Options
Outputs Current- (incl. HART ® ), pulse, frequency, status output and/or limit switch
Totalizer 2 internal counters with a max. of 8 counter places (e.g. for counting volume and/or
mass units)
Verification Integrated verification, diagnostic functions: measuring device, empty pipe
detection, stabilization
.book Page 77 Friday, July 9, 2010 12:29 PM