GW Instek GDS-800 Series User Manual - Manual (Page 56)

GDS-800 Series Digital Storage Oscilloscope Operation Manual
56
4. Save all settings of channel two to memory location two (M 02). (a). Press
SAVE/RECALL button and F3 softkey to select memory location; select memory
location one (M 02) by rotating the VARIABLE knob; (b). Press F4 softkey to save
the channel two settings afterward.
Figure 5-30: Save channel two settings to memory location two (M 02)
5. Press PROGRAM button to enter program mode.
Figure 5-31: Enter to program mode