GW Instek AFG-100/200 Series User Manual - Manual (Page 70)

AFG-125/225 Series Options Manual
70
Power Supply Function
Using the Power Supply Function (AFG-125P & AFG-225P
only)
Background The AFG-125P and AFG-225P have an additional
power supply function. The power supply has
three fixed output levels: 2.5V, 3.3V, 5V.
Steps 1. Press Power Supply from the first
level of the AFG menu.
2. Press Power to turn the power
supply output on.
3. Press Voltage to select one of the
fixed output levels. Status LEDs on
the front panel will light up
appropriately.
Voltage 2.5V, 3.3V, 5V
Note
The current power supply has a current output of 6A
and a voltage output of (2.5V, 3.3V or 5V)±5%.
If the power supply is overload, the OVER LOAD LED
on the front panel will light up.