GW Instek AFG-100/200 Series User Manual - Manual (Page 66)

AFG-125/225 Series Options Manual
66
Sets the start address of the section
of the ARB waveform to be cleared.
Start range 0 ~ 4095
Sets the length of the section of the
ARB waveform to be cleared.
Length range 1 ~ 4096
Press Done to confirm and then
clear the selected section of the ARB
waveform.
Press Done to clear the whole ARB
waveform instantly.
Example
Figure showing the cleared section of the
waveform.
Saving the ARB
Waveform After you have created/edited your waveform,
you can save it for use at a later time. See page 56
to load a User Preset ARB waveform.
1. Press Save Now to save the ARB
waveform to the current directory.