GW Instek AFG-100/200 Series User Manual - Manual (Page 33)

OPERATION
33
Recalling the Preset Settings
Background Recalling the preset settings will effectively reset
the settings to the factory defaults.
Preset Settings
Waveform Mode Sine
Frequency 1kHz
Amplitude 1.000Vpp
Offset 0.0Vdc
Phase 0.0º
Load 50Ω
Output Off
ARB Off
MOD Off
Sweep Off
Burst Off
Frequency Coupling* Off
Amplitude Coupling* Off
Tracking* Off
*Only applicable to the AFG-225.
Steps 1. From the first level of the AFG
menu, press UTIL.
2. Press Preset. The preset settings
will be recalled straight away.