GW Instek AFG-100/200 Series User Manual - Manual (Page 12)

AFG-125/225 Series Options Manual
12
Panel Overview
Front Panel
GND CH1 Output
Power Supply
Status LEDs
CH2 Output
SYNC Output
Positive Output Negative Output
C
 
CH CH
  
GD
V V V
FIED

WP
Power Supply
Status LEDs
V V V
FIED These LEDs indicate the immediate
status of the power supply function
on the AFG-125/225:
2.5V 2.5V output is on
3.5V 3.5V output is on
5V 5V output is on
OVER LOAD Overload condition
Negative Output
8
GD Negative output port
GND Ground port
Positive Output Positive output port
SYNC C Sync output. A TTL signal is output
as the sweep marker or sync output
signal. See page 50 for sweep
details or page 34 for sync details.
CH1 CH
 
CH1 (Signal 1) output.