GW Instek AFG-100/200 Series User Manual - Manual (Page 28)

AFG-125/225 Series Options Manual
28
Selecting a Basic Waveform
Background The AFG-125/225 can output 5 different types of
basic waveforms: Sine, Square, Pulse, Ramp,
Noise.
The basic waveforms can be output as is or they
can be used as the baseband waveforms for the
modulation functions or as the primary waveforms
for the sweep and burst functions.
Connection 1. The AFG-125/225 arbitrary function has 2
output channels, CH1 and CH2. Each output
can be selected individually.
2. Connect a BNC cable
to the appropriate
output (CH1 or CH2).
Panel Operation 1. From the first level AFG menu,
select Signal 1 Setup or Signal 2
Setup from the bottom menu to
select the output channel.
2. Press Waveform Mode from the
bottom menu and then select a
waveform from the side menu.
Waveforms Sine, Square, Pulse Ramp, Noise
3. See page 29 to set the output
settings and turn the output on.
Page 29