GW Instek AFG-100/200 Series User Manual - Manual (Page 38)

AFG-125/225 Series Options Manual
38
Carrier
FSK output
SYNC output
0V
0V
Marker
FSK output
SYNC output
0V
0V
Steps 1. From the first level of the AFG
menu, press UTIL and then press
Sync Setup on the side menu.
2. From the side menu choose the
sync setting:
The Sync function will turn the sync
output on for all waveforms except
for noise.
(Note: If Marker is turned on in the
Sweep function, the Sync On setting
will be overridden.
Selects the source signal on which
to base the sync signal.
Source: Signal 1, Signal 2
When Sync is on, You can force the
sync signal to follow the carrier or
the marker* mode.
Mode: Carrier, Marker