Aquametrix SHARK-120/240 Controllers User Manual User Manual

Page 33

MULTI-PARAMETER CONTROLLER & ANALYZER USER’S MANUAL

pH - Setup Menu - T.Comp Override 4.12

pH - Setup Menu - T.Comp Override 4.12

Page 31

DOWN

Use the or keys to
select either ON or OFF.

Press the key to accept the
change and move to the Temperature
Entry function

Press the key once
which will move the cursor
back to the RH side of the
display.

Press the key once
which will move the cursor
over the least significant digit
of the temperature display.

Use the and to
adjust the reading until it agrees
with the known temperature of the
probe or process

Press the key to accept the
reading and move to the store function

Press the key once
which will move the cursor
back to the RH side of
temperature display.

The user can now enter the actual
probe or process temperature

Then press the key to store the
selection and return to the T. COMP
OVERRIDE Menu.

NOTE

PRESS THE AND KEYS

TOGETHER TO GO IMMEDIATELY BACK TO

RUN MODE

DOWN

With "N" selected, pressing the
key will NOT store the selection, but
simply return to the T. Comp Override
Menu. This function is useful if you wish
to view the current selection without
making any changes.

If you wish to save the setting, press the
key to highlight the Y character

Not stored

Stored

RUN MODE

Press the key once
which will move the cursor to
the ON or OFF text

Temperature Compensation Override is used to manually set
the actual probe or process temperature. This is useful if the
probe does not have a temperature sensor or if the process
temperature is constant. When the override is enabled, the
controller will use the selected temperature when performing
temperature compensation calculations.

T.COMP OVERRIDE

STORE? Y N

TEMP 35. 7 C >

TEMP 35.7C >

T.COMP OVERRIDE

TEMP 25. 4 C >

T.COMP OVERRIDE

TEMP 25.4C >

AUTO RETURN

T.COMP OVERRIDE

CALIBRATION

UTILITIES

SETUP

7.15pH 25.0C

TEMP UNIT

TEMP SENSOR

PROBE SELECTION

COMPENSATE O FF >

COMPENSATE O N >

T.COMP OVERRIDE

COMPENSATE O N >

T.COMP OVERRIDE

COMPENSATE OFF >

T.COMP OVERRIDE