Aquametrix AM3422 Series Conductivity Sensors - Manual

Features
• Small size enables convenient
installation and service
• O-ring seals used on all versions
for high on-stream reliability
• Low Maintenance - Reduced
cleaning requirements
• Wide Measuring range
• Automatic Temperature Com-
pensation
• Plastic gland fitting allows re-
moval and replacement without tools
The AM3422 sensors offer a compact design that allows installa-
tion into standard pipe fittings in small line sizes such as 3/4” and 1”,
avoiding the need for special flow cells.
Simplicity of the design also allows them to be economically offered
in exotic metals for especially corrosive chemical applications.
Wetted materials of construction are 316 stainless steel and Teflon,
with double o-ring seals at all points. The outer EPDM o-ring bears
the brunt of process interface, allowing the back o-ring to maintain
reliable sealing free from chemical attack. An integral temperature
element tailored to the analyzer of choice allows automatic compen-
sation for maximum accuracy. Leads are 10’ standard, stripped and
tinned ends or optional spade lugs.
Process connections are made via a bored through swage fitting with
1/2” or 3/4” NPT threads. This fitting can be screwed into a line, or
tank, and it can also be turned around and connected to a standpipe
for use in a submersion configuration. The AM3422 is good for gen-
eral purpose and covers a broader range of conductivities.
Description
100 School Street
Andover, MA 01810
978-749-9949
Toll free - 855-747-7623
www.WaterAnalytics.net
Applications
• Plating
• High purity water applications
• Pharmaceutical Applications
• Reverse Osmosis systems
• Fume Scrubbers
• Cooling Towers
• Textile Manufacturing
• Food and Beverage
Aquametrix Model AM3422 Series
Stainless Steel Conductivity Sensors
Great Lakes
Replacement
by
Water Analytics
AquaMetrix
by
Water Analytics
AquaMetrix