Aquametrix AM3455 Series Conductivity Sensors - Manual

Features
• Low Maintenance - Reduced
cleaning requirements
• Small size enables convenient
installation and service.
• O-ring seals used on all ver-
sions for high on-stream reliability
• Plastic gland fitting allows re-
moval and replacement without tools
• Automatic Temperature Com-
pensation
The AM3455 sensors are welded to blind flanges and can be
inserted into standard tee fittings in sanitary systems using
Ladish or Tri-Clover fittings.
Wetted materials of construction are 316L stainless steel and
Teflon, with double redundant EPDM o-rings. The process
side or-ring is the only one in contact with the stream, al-
lowing the back o-ring to maintain reliable sealing, free from
chemical attack. Temperature compensation elements are
potted in the body itself. Leads are 10’ standard.
Process connections are Tri-Clamp sanitary flanges of cus-
tomer specified size. The insertion depth can be modified on
request to obtain proper positioning in a specific installation.
The sensor is built for clean in-place service, either stream or
sterilizing chemicals. All wetted materials are FDA compliant
and USP Class VI is available.
Description
100 School Street
Andover, MA 01810
978-749-9949
Toll free - 855-747-7623
www.WaterAnalytics.net
Applications
• Dairy
• Food and Beverage
• All sanitary applications
• High purity water applications
• Pharmaceutical Applications
• Reverse Osmosis systems
Aquametrix Model AM3455 Series
Stainless Steel Sanitary Conductivity Sensors
Great Lakes
Replacement
by
Water Analytics
AquaMetrix
by
Water Analytics
AquaMetrix