beautypg.com

Aquametrix AM-DFA Doppler Flow Analyzer User Manual

Aquametrix, Aquametrix am-dfa

background image

• Displays, transmits, totalizes and

controls
• User friendly, 3 key calibration
• Password protected
• Isolated 4-20 mA output
• 2 programmable control relays
• Dual digital signal processing system
• Optional data logger
• Watertight NEMA 4X (IP66)

polycarbonate enclosure
• Electrical surge protection and RFI

filters
• Optional data logger & intrinsic

safety barriers

Aquametrix AM-DFA

Non-Contacting Doppler Flow Monitor

100 School Street

Andover, MA 01810

978-749-9949

Toll free - 855-747-7623

www.WaterAnalytics.net

• Raw sewage
• Viscous liquids
• Chemicals and acids
• Sludge and slurries
• Solvents
• Treated wastewater
• Pulp stock
• Food products
• Lubricating Oils
• Crude Oil
• Cooling Water

Description

Features

Applications

Ideal for “Problem” Liquids.

Aquametrix Doppler flow analyzers monitor the flow rate of dirty or aer-

ated liquids including: wastewater, chemicals, acids, slurries, abrasives

and viscous liquids. Recommended for full pipes and any fluid that con-

tains solids or bubbles.

External Sensor: No Contact, No Maintenance

The AM-DFA strap-on sensor is mounted on the outside of a plastic or

metal pipe 1/2 inch (12.7 mm) diameter or larger. To measure flow an

acoustic signal is reflected back to the sensor from moving particles or

gas bubbles suspended in the fluid.

Installation is easy - without shutting down the flow system. No contact

is made with the moving fluid and no pipe cutting or drilling is required.

There is no fouling or scale build-up on the sensor.

The AM-DFA Doppler Flow Meter includes an ultrasonic sensor, a sim-

ple 5-key calibration system, a large digital flow rate display with totaliz-

er, isolated 4-20 mA output and two programmable control relays. Data

logger and intrinsically safe sensor are optional.

by

Water Analytics

AquaMetrix

by

Water Analytics

AquaMetrix